HOW TO USE YOUR WATCH
This watch is an automatic watch equipped with a manual winding mechanism
• When the watch is worn on the wrist, the motion of the wearer's arm winds the mainspring of the watch.
• If your watch is completely stopped, it is recommended that you manually wind the mainspring by turning the crown
clockwise.
•
To either wind the watch or set the time begin by unscrewing the watch counter clockwise until the crown “pops” off the
threads.
How to manually wind the mainspring by turning the crown
•
After unscrewing your crown, leave the watch in the normal crown position and slowly turn the crown clockwise (in the 12
o’clock direction) to wind the mainspring
(
Turning the crown counterclockwise (the 6 o’clock direction) does not wind the mainspring
)
.
•
Continue to turn the crown until the mainspring is sufficiently wound. The second hand will start moving.
HOW TO SET THE TIME
After unscrewing your crown, pull the crown out to the 1
st
click (Position 1), then gently pull it out
to the 2
nd
click (position 2). The second hand will stop. Slowly advance the hands clockwise till
you reach the desired time. Once the watch is wound up fully, it operates for about 36 hours.
