51
6LE007596Ad
Unboxing
13.3 Drawout circuit breaker
To remove a drawout circuit breaker with chassis from its pallet, proceed as follows:
Action
Illustration
1
Put the circuit breaker in
the disconnected position
(see Chapters 8.1
Changing from the
connected position to
the test position and
8.2 Changing from the
test position to the
disconnected position).
2
Pull the guide rails as far
as possible.
3
Slide the circuit breaker
from the chassis on its
guide rails.
CAUTION
Risk of the circuit breaker falling out
Risk of injury by crushing.
Ensure the device is only handled by qualified personnel equipped with lifting equipment
and suitable safety equipment.