-
18
-
Removing a handset from the base (de-registration)
1.
After confirming the password, press ‘Up’ or ‘Down’ until 'Remove HS' is displayed,
then press
2.
Press ‘Up’ or ‘Down’ to scroll through until you reach 'Remove HS', then press
key.
3.
Press ‘Up’ or ‘Down’ to enter the handset you wish to remove. (Remark: at least 2
handsets have to be registered to use this function)
4.
You can press
key to give up the removal.
A handset cannot be removed if it was registered by default (during production).
Setting the Dial mode
1.
After confirming the PIN code, press ‘Up’ or ‘Down’ until ‘Dial Mode’ is shown,
then press
key,
2.
Press ‘Up’ or ‘Down’ to Enter Tone or Pulse dialing mode,
3.
To confirm press
key. A beep is heard for confirmation.
The selected item will have a "*" mark (e.g. *Tone) as indication.
PABX pre-fix code
This function allows you to insert a prefix code to a number for dialing.
1.
After confirming the PIN code, press ‘Up’ or ‘Down’ until PABX is displayed, then
press
key.
