EN
22
5.4 INTERRUPTING OR CHANGING THE DRYING PROGRAMME
1. The drying programme can be interrupted by the same procedures as the washing pro-
gramme.
2. To end the programme and remove the laundry, it is best first to cool the load. Use the
selector button to set a drying time of 20 minutes. Restart the appliance as described above
and the laundry will be ready for removal.
5.5 CLEAN PROGRAMME
To keep the appliance operating at peak efficiency over time, it has a CLEAN programme for
regular cleaning of the drying circuit to remove any fluff deposits.
1. After a given number of drying cycles, the CLEAN symbol
lights up and the text Cln
appears on the display to warn that this programme needs to be run. The warning light
remains on until the CLEAN programme is carried out. The light goes out at the end of the
programme.
2. To perform the CLEAN programme, proceed as follows:
a. Make sure that the drum is completely empty and close the door.
b. Turn the knob to the CLEAN programme (see programmes table for the exact position
on the knob)
c. Press the START/PAUSE button
The CLEAN programme can also be carried out even if the light on the display is not on.
