CONNECTION THE HOB TO THE MAINS POWER
SUPPLY
The power supply should be connected in compliance with the relevant
standard, or a single-pole circuit breaker.
1. If the cable is damaged or needs replacing, this should be done by an
after-sales technician using the proper tools, so as to avoid any acci-
dents.
2. The installer must ensure that the correct electrical connection has
been made and that if complies with safety regulations.
3. The cable must not be bent or compressed.
4. The cable must be checked regularly and only replaced by a properly
qualified person.
CAUTIONS
1. The hob must be installed by qualified personnel or technicians. We
have professionals at your service. Please never conduct the operation
by yourself.
2. The hob shall not be mounted to cooling equipment, dishwashers and
rotary dryers.
3. The hob shall be installed such that better heat radiation can be
ensured to enhance its reliability.
4. The wall and induced heating zone above the work surface shall
withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be
resistant to heat.
6. A steam cleaner is not to be used.
