732.28.436
HDE 23.06.22
5
3. Getting started
3.1 Installation
1. Power the Connect Mesh Box by plugging it into a Häfele Loox LED Driver. Make sure that the
power supply unit and the box are from the same voltage system.
[Image 3] Installation Mesh Box and LED Driver (example shows 12V version)
2. Please insert a new battery to set up the Connect Mesh Remote ECO. In order to do this, open
the battery compartment on the back of the device and insert a coin cell battery (CR2032).
The devices are already paired so after plugging in the lights you can start.
[Image 4] Connect Mesh Remote Eco, Battery replacement
Driver Constant Voltage
Same voltage System
Connect Mesh Box Device
Reset Button
Battery Compartment
