732.28.428
HDE 27.07.21
9/11
en
3.1.2. Wall Switch Standalone Mode with Multi-White Lights
To start, the wall switch needs to contain a irmware version of at least 4.4.6 (otherwise please update) and needs to
be reset (status led blinks).
1. Start the search for mesh boxes by pressing the upper left and lower left buttons for 4 seconds. The led will
start blinking (slowly).
2.
Find and conigure Mesh Box: When the led starts to blink fast, a mesh device is found and will get conig
-
ured.
3. To stop searching for other mesh boxes, press any button of the switch. To start searching again, continue
with step 1.
The buttons of the switch will control the mesh box in the following way:
•
Upper left button: MW Light connected to port 1 and 2
•
Upper right button: MW Light connected to port 3 and 4
•
Lower left button: MW Light connected to port 5 and 6
•
Lower right button: All lights connected
Controls are:
•
Single tap: On/Of
•
Long press: Dim up/down
•
Tap and long press: Temperature up/down
Group 3
• ON/OFF:
Single Click
• Dim Up/Down:
Longpress
• Temp Up/Down
: Double Click
[image 8]
Group 1
• ON/OFF:
Single Click
• Dim Up/Down:
Longpress
• Temp Up/Down:
Double Click
Group 2
• ON/OFF:
Single Click
• Dim Up/Down:
Longpress
• Temp Up/Down:
Double Click
Group ALL
• ON/OFF:
Single Click
• Dim Up/Down:
Longpress
• Temp Up/Down:
Double Click
Constant Power
MW
Group 3
MW
Group 2
MW
Group 1
