Subject to
alteration
© 2021 by Häfele SE & Co KG
Adolf-Häfele-Str. 1 · D-72202 Nagold www.hafele.com
11/11
732.28.428
HDE 27.07.21
en
3.2. Standalone Mode with Remote Control as Provisioner
When using the Remote Control as Provisioner for the Standalone Mode, the Wall Switch can be added as a
provisioned device.
3.2.1. Remote Control Standalone Mode functions Wall Switch
The Wall Switch will be added when the Remote Control is searching for new devices in the Standalone Mode.
This happens when the Remote Control is searching for Mesh Boxes to be provisioned (with Monochrome-,
Multi-White- or RGB-Lights), as described in Remote Control Operational manual.
Provisioning the Wall Switch, see section 3.2, using the Standalone Mode of the Remote Control will provision the
Wall Switch with the following described functions:
The Wall Switch behaves as group 7 on the Remote Control.
Group 7
Scene A
Scene B
Scene C
[image 10]
Button
Group or Scene
Action
Upper Left
Group 7 (All Lights) On/Of
Toggle On/Of (click) Dimm (long press)
Upper Right
Scene A (of all lights)
Trigger Scene (click) Dimm Group (long press)
Lower Left
Scene B (of all lights)
Trigger Scene (click) Dimm Group (long press)
Lower Right
Scene C (of all lights)
Trigger Scene (click) Dimm Group (long press)
