Häfele 535.62.591, Руководство пользователя

Страница: 10 / 56

10
INSTALLATION
Installing the oven
•
The kitchen area should be dry and aired
and equipped with efficient ventillation.
When installing the oven, easy access to
all control elements should be ensured.
•
●This is a Y ●type design built●in oven, which
means that its back wall and one side wall
can be placed next to a high piece of fur-
niture or a wall. Coating or veneer used
on fitted furniture must be applied with a
heat●resistant adhesive (100
o
C). This pre-
vents surface deformation or detachment
of the coating.
•
●Hoods should be installed according to
the manufacturer’s instructions.
•
●Make an opening with the dimensions giv -
en in the diagram for the oven to be fitted.
•
●Make sure the mains plug is disconnected
and then connect the oven to the mains
supply.
•
●Insert the oven completely into the open -
ing without allowing the four screws in the
places shown in the diagram to fall out.