7
Installation (Vent inside)
If you do not have an outlet to the outside, exhaust pipe is not required andthe installation is
similar to the one show in section
“Installation (Vent outside)”.
Activated carbon ilter can be used to trap odors.
In order to install the activated carbon ilter, the grease ilter should be detached irst. Press the
lock and pull it downward.
Plug the activated carbon ilter into the unit and turn it in clockwise direction. Repeat the same
on the other side.
NOTE:
•
Make sure the filter is securelylocked. Otherwise, it would loosen and cause dangerous.
•
When activated carbon filter attached, the suction power will be lower.
