NOTE: If using paper filters. The sides of the filter must fit flush against
the side of the filter basket. If filter collapse occu
r
, dampen the filter
before placing it in the filter basket. Add the desired amount of coffee and
gently shake to level the coffee.
3.
Fill the water reservoir with cold, fresh water to the desired capacity
(1 cup estimate 5 ounces). For an easy and accurate filling, the water
markings on the water reservoir show the amount of water needed to
make the corresponding desired number of cups. Do not fill past the "1.8 L
line" or water will flow out of the Smart Drip Coffee Maker.
NOTE: The amount of brewed coffee would be slightly less than the
amount of water poured in the water reservoir. This is due to the
absorption of water by the coffee grounds.
Using your Smart Drip Coffee Maker without the smart app
1. After completing the steps in the Adding Water and Ground Coffee section
and with the carafe and the filter basket securely in place, turn the Smart
Coffee Maker on by pressing the POWER button once. The POWER button light
will turn on to signal that the Smart Coffee Maker is on and brewing.
NOTE: Brew can be stopped by pressing the POWER button a second time.
2.
After the used coffee grounds have cooled, carefully remove the filter
basket and discard them.
NOTE: The brew basket d
r
awer is hot after brewing. Always allow the Smart
Coffee Maker to cool down before cleaning.
3.
Make sure the Glass Coffee Carafe is empty and in place before starting
to brew coffee.
4.
Be sure to turn your Smart Coffee Maker off when no longer using it.
The button should be disabled to use TIMER and STRONG features.
