Hafco WBS-1836, Инструкция по эксплуатации

Страница: 6 / 29

4
There is a certain amount of hazard involved with the use of woodworking machinery. Using the
machine with the respect and caution demanded as far as safety precautions are concerned will
considerably lessen the possibility of personal injury. However, if normal safety precautions are
overlooked or ignored, severe personal injury to the operator can occur.
1. Read the operation manual before operating this machine.
2. The machine should be disconnected from the power source before performing maintenance
or adjustments to the internal mechanisms, or when making repairs.
3. Before leaving the machine, make sure the work area is clean.
4. Check timber for loose knots, nails, or other items which may cause a hazard or affect the
machine's performance.
5. Keep all guards in place and in working order.
6. Do not force the machine. It will do the job better and be safer working at the rate for which it
was designed.
7. All children and visitors should be kept a safe distance from the working area.
8. The operator should keep proper footing and balance at all times.
9. Do not operate the machine while under the influence of drugs, alcohol, or any other
medication.
10. Avoid awkward operations and hand positions where a sudden slip could cause your hand to
move into the sanding area.
11. Never leave the machine until it comes to a complete stop, and never leave the machine
running unattended.
12. The employer is responsible for selecting competent and qualified employees.
13. Safety shoes should be worn to provide protection against rolling objects, falling objects, and
sharp edges in the workplace.
14. Eye protection should be worn and such devices should be carefully selected, fitted and used.
Compulsory wearing of glasses with impact resistant lenses and side shields is a good safety
policy.
15. Wear hearing protection when operating the machine.
16. Do not wear rings, necklaces or jewelry around moving machinery.
17. Do not wear loose fitting clothes. Clothing should be comfortable, but long sleeves, neckties,
etc. should not be worn.
GENERAL SAFETY RULES FOR WOODWORKING MACHINERY
Page 6 Instructions Manual for WBS-1836 (L124) 07/08/2017