Hafco WBS-1836, Инструкция по эксплуатации

Страница: 12 / 29

10
1. Loose A
2. Afterwards, spinning object B
（
B
）
to anti-clockwise direction to low object F
（
F
）
down so that
you can loose the sanding belt.
3. Then loose object C
（
wing screw
）
, remove object D.
4. Remove and replace the sanding belt.
5. Reverse the procedure to load the sanding belt back
：
screw and lock object D and C, spin B to
object the sanding belt , finally screw A to finish the process.
MOUNTING AND REPLACING SANDING BELT
Page 12 Instructions Manual for WBS-1836 (L124) 07/08/2017