Hafco HM-51B, Инструкция по эксплуатации

Страница: 13 / 31

- 12 -
VI THE LUBRICATION OF MACHINE
AND ROLLING BEARING
1.Each rolling bearing to lubricated with lubricating fat on
time (prefer to chart-2)
2.spindle, sleeve, column, table ete,should be lubricated at
the right moment.
VII ELECTRIC SYSTEM
1.Electrical circuit adopt the advanced international component to
make up,which make the machine easy to operate and safe.
VIII TRANSPORT AND ATTENTION
1.While transporting machine,must be careful to carry and put
down.
IX SIMPLE MALFUNCTION & OBVIATION
1.If the motor does not turn,please inspect it is right to connect
wire or check electrical source.
2.If the radial run out of spindle is big with noise and
heat,please inspect wether spindle is too loose.
Pls spindle the nut on the spindle assembly to the fittest.
3.When the machine wobble,pls check the motor mount and
lever lock nut screw,machine head support on the
spindle,ifloosing,pls adjust and lock.
Page 13 Instruction Manual for HM-51B (M577) 25/03/2019