Hafco EB-270DSA, Инструкция по эксплуатации

Страница: 5 / 29

- 4 -
3.2 Controls
A~G Control Switches
A. Speed selector
B. Main connect switch
C. Saw bow up switch
D. Saw bow down switch
E. Hand/foot pedal operation selector
F. Cycle start switch
G. Start switch (hydraulic flow control)
H. Emergency button
I. Footpad emergency button
J. Footpad switch
K. Flow regulator
1~17 Indicator lights
Red- Warning indicator
Yellow- Selection indicator
Green- Operation indicator
1. Power supply ON, indicator lights
2. Saw bow up, indicator light
3. Saw bow down, indicator light
4. Hand operation, indicator light
5. Foot pedal operation, indicator light
6. Cycle start switch indicator light
7. Start switch (hydraulic flow control), indicator light
8. Saw bow maximum height, indicator light
9. Saw bow lowest height, indicator light
10. Open blade cover, warning indicator light
11. Improper speed selection, warning indicator light
12. Motor overload, warning indicator light
13. Broken blade, warning indicator light
14. Emergency button indicator light
15. Hydraulic motor overload, warning indicator light
16. Foot pad’s emergency button indicator light
17. Foot pad, operation indicator light
3.3 Vise adjustment
Clamping the Work Piece
- Place work piece between the jaws.
- Use the hand wheel to close the vise jaw. For
multiple cuts of a same size material, leave a small
gap between the work piece and vise jaw. Push cycle
start button (F). The vise will automatically clamp the
work piece while going through the operation cycle.
When the operation cycle is finished, the vise will open
and the work piece can be adjusted or replaced.
Operation of the Vise
When cutting angles, it may require the adjustment of
the vise jaw’s position so that the saw blade’s path is
not impeded. Follow the procedures below.
- Release the track support by turning handle (1)
counter-clockwise.
- Release the vise by moving the lever (2) to the left.
- The vise may now be moved to right position or left
position by pushing with one hand on the adjustable
vise jaw and the other hand on the track handle (1).
- Once in position, move the lever (2) to the right to
lock it into position. If the lever (2) is not between
the vise/bed mounts and facing the user, then the
vise will not be able to lock. If the vise lever (2) has
K
H
I
J
1
E
B
A
G
D C
1
2 3 5
7
4
6
F
16
17
14
13
15
10
8
9
12
11
5 Instruction Manual for EB-270DSA (B066) 31/03/2016