Hafco AL-320G, Руководство по эксплуатации

Страница: 15 / 42

15
F. OPERATION
After assembling the machine, remove the anti-corrosion coating on the slideway, carriage,
toolpost, tailstock and change gears with a clean cloth and kerosene. Once the machine is
clean lubricate the machine as per instructions.
19
F.1 Illustration Of The Operation Parts
1. Socket head cap screw: to open or close the cover of the gear change box
2. Plug: the power lead and plug of the machine
3. Shifting handle: has three positions to adjust the speed.
4. For/Rev handle: has three positions which changes the direction of the tooling travel.
The middle position is neutral.
5. Shifting handle: Has two positions to adjust the speed.
6. Forward/reverse switch: to control the rotation directions of the motor and spindle. It can
be operated only after the motor is stopped.
7 Start button: to start the motor
8. Stop button: to stop the motor
9. Longitudinal hand wheel: to operate the apron longitudinal movement
10. Cross hand wheel: to move the cross slide and toolpost.
11. Toolpost handle for loosing or locking the toolpost
12. Nuts: to fix the top slide to the cross slide. This can allow rotation on the topslide.
14. Toolpost hand wheel: to move the topslide and toolpost forward or backward
15. Handle: to control the half-nut for threading
16. Handle: to control the longitudinal and cross auto feeding which has three positions.
18. Lever: to lock the tailstock. The tailstock can be removed or moved freely after loosening.
17. Tailstock Sleeve lock lever. Locks the sleeve in place after moving
19. Tailstock hand wheel: moves the sleeve after the lock lever is loosened.
20. Screw: to adjust the centering position of the tailstock, with the main spindle. Can be
adjusted for taper turning
Page 15 Instructions Manual for AL-320G (L141) 07/02/2018