Hafco AL-320G, Руководство по эксплуатации

Страница: 12 / 42

12
E. INSTALLATION AND ADJUSTMENT OF THE LATHE
When lifting the machine it is recommended that the method used in the diagram below
is used or a fork lift is used. Since there is no obvious hand holding places, please do not lift
or carry the lathe by hand. When lifting the lathe, the use of soft slings or rope should be
used to avoid any damage. To keep the lathe in balance, the carriage and the tailstock
should be moved away from the headstock, to the opposite end of the bed. It is important
to ensure that the tailstock is clamped in order to avoid moving or falling off the end of the
bed. (Fig.6)
Fig. 6
Place the lathe on the Stand, using the four recommended bolts to secure the lathe on the
Stand. The Stand is an optional accessory which can be supplied by your distributor. (Fig. 7)
Fig. 7
E.1 Installation
Page 12 Instructions Manual for AL-320G (L141) 07/02/2018