8
OPERATION MANUAL
ASSEMBLING THE WL-14V VARIABLE WOOD LATHE:
1
Part No.
Description
Qty.
1
WL-14V Wood Lathe
1
2
Heavy Duty Live Centre
1
3
Spur Centre
1
4
Draw Bar
1
5
Faceplate
1
6
150mm Tool Rest
1
7
Spanner
1
8
Hex Keys
4
9
Power Lead
1
10
300mm Tool Rest
1
1. Unpack the lathe and its components from the shipping package.
2. Clean any parts coated with the rust preventative compound with a cloth moistened with a
petroleum-based solvent or cleanser, such as Kerosene or Mineral Spirits. After all the parts
have been cleaned, coat the lathe bed with dry silicon spray.
3. Insert the Tool Rest into the Tool Slide and secure it with the lock handle.
4. Assemble the Tailstock Handle and quill lock as below.
5. Place the Drive Spur Centre into the Headstock and the Live Centre into the Tailstock. Gently
slide the tailstock up to the Headstock until the two points nearly touch. They should align.
If not, consider loosening the bolts holding the headstock to the bed and aligning the head
stock so the two centre points, align vertically and horizontally.
6. Screw the Hand wheel onto the outboard end of the Spindle.
Assembling the Tailstock:
1. Insert the wheel handle screw
into the quill crank Handle.
2. Using a flat head screw driver,
screw the quill crank handle onto
the rear face of the quill adjusting
wheel and tighten
5
6
7
8
9
4
3
2
1
10
Page 9
Instructions Manual for WL-14V (W385)
11/08/2017
