Hafco Metalmaster DCM-202, Руководство по эксплуатации

Страница: 12 / 24

12
OPERATION MANUAL
4.5 ASSEMBLY
The machine must be fully assembled before it can be operated. First clean any parts that are
coated in rust preventative to ensure the assembly process can proceed smoothly.
To assemble the dust collector:
1. Attach the casters to the bottom of dust collector
using the 5⁄16”x 1⁄2” hex. head bolts. (Fig.4.1)
F
ig
.4.1
F
ig
.4.2
2. Attach the dust port to the side of the dust
collector with the 5⁄16”x 1⁄2” button head cap
screws. (Fig.4.2)
F
ig
.4.3
3. Using a Phillips screwdriver, attach the Y-inlet to
the dust port with a #10 x 3⁄8” flange screw.
(Fig.4.3).
4. Open the front access door. Remove the protective
packing from the collecting drawer, and
place the drawer into its place. (Fig.4.4) Close and
lock the front access door.
F
ig
.4.4