8. Bolt the Saw Base to the Legs as shown. Finger tighten all bolts first (6)
then fully tighten. Your assistant should still be steadying the machine.
You can now level the Shelf and tighten the screws. Double check all
bolts and screws are tight. The machine should now be stable.
9. Fit the Handle.
10. Pin the Handle inside the Stand.
Open up the ends of the Pin to
stop it from falling out (see photo
of Wheel (13)).
11. Fit Shaft and pin both ends as
shown above.
12. Fit the Wheels with this face against the Wheel Bracket.
13. Fit Wheels in place and open the
Split Pins as shown.
BS4A (B002) Bandsaw Assembly Instructions
4/2/2014
Page 2 of 3
Split Pin (2)
Split Pin (4)