Hafco Metalmaster BS-76, Руководство по эксплуатации

Страница: 6 / 27

6
OPERATION MANUAL
DO NOT use this machine unless you have read this manual or have been instructed in the use
of this machine in its safe use and operation
This manual provides safety instructions on the proper setup, operation, maintenance, and
service of this machine. Save this manual, refer to it often, and use it to instruct other operators.
Failure to read, understand and follow the instructions in this manual may result in fire or
serious personal injury—including amputation, electrocution, or death.
The owner of this machine is solely responsible for its safe use. This responsibility includes, but
is not limited to proper installation in a safe environment, personnel training and authorization
to use, proper inspection and maintenance, manual availability and comprehension, of the
application of the safety devices, integrity, and the use of personal protective equipment.
The manufacturer will not be held liable for injury or property damage from negligence,
improper training, machine modifications or misuse.
WARNING
2.1 GENERAL METALWORKING MACHINE SAFETY

Always wear safety glasses or goggles.

Wear appropriate safety footwear.

Wear respiratory protection where required.

Gloves should never be worn while operating the machine, and only worn when
handling the work piece.

Wear hearing protection in areas > 85 dBA. If you have trouble hearing someone speak
from one metre (three feet) away, the noise level from the machine may be hazardous.

DISCONNECTION THE MACHINE FROM POWER when making adjustments or servicing.

Check and adjust all safety devices before each job.

Ensure that guards are in position and in good working condition before operating.

Ensure that all stationary equipment is anchored securely to the floor.

Ensure all machines have a start/stop button within easy reach of the operator.

Each machine should have only one operator at a time. However, everyone should know
how to stop the machine in an emergency.