HAFA 1509952, Руководство пользователя

Страница: 12 / 12

12 (12) 12 (12)
Garanti/Warranty.
Service, resevdelar/spare-parts
Sweden: Tel: +46 (0)35 15 44 75
Norway: Tel: +47 69 31 02 30
Finland: Puh: 0207 43 50 00
www.hafa.se
www.hafa.dk
www.hafabad.no
www.hafa.se
www.hafabathroom.ru
www.hafa.eu
E-mail:
service@hafa.se
service@hafabad.no
Tillverkare/Manufacturer.
Terma www.termaheat.com
GB: Users manual
A - On/Off
B - Temp +
C - Temp -
D - Function indicator Timer
E - Temperature indicator
F - Timer On/Off
Continuous operation
Turn the electric cartridge on or off using the On/off button (A). LED 2-5 (E) will start flashing.
Temperature
Set the desired temperature using the + or - buttons. (B or C). LED2-5 (E) will flash with a blue light. When
the desired temperature is reached, LED2-5 (E) will be illuminated with a solid blue light.
2-hour Timer
The electric cartridge starts and runs for two hours with set temperature. Press Timer On/Off (F). The
function indicator (D) will be illuminated with a solid red light. The temperature can be adjusted while the
timer function is operating by pressing the + or - buttons.
Anti-freeze function
If the towel rail is switched off and the sensor detects that the temperature has dropped below 6°C, the
towel rail switches on automatically to prevent the water inside freezing. The middle function indicator (E)
will flash with a blue light when this function is activated. This function will work automatically as long as the
electric cartridge has power.
Indication of temperature
Since minimum temperature of the electric cartridge is 30 degrees the left
temperature indicator always indicates 30 degrees. The other lights indicates
different temperature dependent on set maximum temperature.
Calibrating maximum temperature
The electric cartridge is delivered with a standard maximum temperature of 60degrees. It is possible to
adjust the maximum temperature in 5 degrees increments between 45 to 60 degrees
In order to modify the maximum temperature, unplug the device and plug it
back in, while pressing button. A single diode will start flashing on the
display panel. Use + and - buttons to set one of the 5 possible maximum
temperatures. The first diode stands for 45 degrees and then increases
with 5 degrees for each diode. The last diode stands for 65 degrees.-
After selecting the new maximum temperature press on/off button to store the new setting.
A
B
C
D
E
F