HAEGER Ocean Burst 2000, Инструкция по эксплуатации

Страница: 9 / 36

English
Instructions for use 7
Emptying out the water tank
• Take the plug out of the mains socket, open the lid on the filling spout and empty out the tank by holding the iron pointed-end
down and shaking it gently.
Storage
• The iron can be stored away with the cable coiled up in the rear area. It is advisable to store the iron in the upright position with
the water tank empty and the steam regulator set to “0”.
Cleaning & Maintenance
• Avoid scratching the iron; do not pass it over hard surfaces. Traces of starch or sprays can be removed from the base by using
damp cotton wool or a non abrasive cleaning product.
• Do not put chemicals or detergents into the water tank.
• The outside surfaces can be cleaned down with a damp cloth, without ever having to use abrasive agents or solvents.
• With the anti-dripping system, you can perfectly iron even the most delicate fabrics.
Technical Specifications
Model: SI-200.001A Main voltage: 220-240V~ 50/60Hz
Protection Class: I Power: 2000W
Conformity CE
This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility
Directive 2004/108/CE, and low voltage Directive 2006/95/CE, and has been constructed in accordance with the latest
safety regulations.