Important information
Thank you for purchasing our smart battery charger. Please read this instruction manual
carefully before operating the device. Keep this manual in a safe place for future reference.
This instruction manual is part of the product. It must be handed over along with the device
if it is passed on to a third party.
Introduction
This compact smart battery charger uses the latest switch-mode technology and it designed
particularly to charge lead-acid batteries in dual battery system to their best level. The
automatic 7 stage charging algorithm delivers a much faster, efficiency and full charge
without the issue of voltage drops. Thanks to the boost-charging feature, this helps activate
the battery status and wake up a weak or flat battery to a suitable recharging level. This also
improves the charge delivered to your battery, increasing battery life and saving on
premature battery failure.
This smart battery charger can be used charging for GEL/AGM/WET batteries by press the
mode selection button. And this smart battery charger can be used as a constant power
supply to run accessories that require a stable and clean DC voltage. For safety reasons, the
input and output of the charger are completely isolated and the batteries are protected for
overcharged.
The cooling fan is thermal & charge current dual controlled, when temperature reach up to
45 degrees or when charge current up to 2A, the cooling fan start to working, it will switch on
and off automatically to control the internal temperature of the unit.
Only when this smart battery charger connects to battery, then the charger has DC output
start to charge. Note: it is a touch-type battery charger, the first start battery voltage for
constant current mode need up to 12.6V.
DC short circuit protection: after short circuit protection, cutoff the DC output, LCD display " -
P-" , after short circuit release auto. Reset.
Over heat protection: when temperature up to 75
±
5
℃
, the LCD display "-P-", when
temperature down auto. Reset.
Warning
Risk of electric shock! Do not open the device if it has been connected to the AC power
source.
This device has been CE tested and conforms to the applicable directives and
standards.
-1-
1.
2.
3.
4.
