hadewe Veloria, Руководство пользователя

Страница: 16 / 28

16
Use
Clamping the tool/ bur
The handpiece is equipped with a
chuck, which can hold all burs with
a diameter of 2.35 mm (this is the
diameter usually used for tools in
podiatry). To open the chuck, push
the knob forward with your thumb
and leave it there. Now insert the
tool as far as possible. Pull back the
knob and the tool will be firmly
clamped
For security reasons, only
change the tool, if the
handpiece is turned off.
Setting up the speed
Hold the handpiece (incl. tool) in
your hand or store it in the hand-
piece holder attached to the side of
the control unit.
Switch on the unit with button
(9). Now you can also set the
speed with buttons (3) and (4),
and choose its direction of rota-
tion with button (6)
.
When the device is
brought out of standby
mode it will run with the
rotation speed and suction power
used last. Take care to not start
the mill at an overly high rotation
speed. Select the required rota-
tion speed before changing the
milling tool.
Foot switch (Art. 0970)
Commencement of foot switch
Only use the original hadewe foot
switch to avoid damages. Insert the
plug of the foot switch into the socket
with this symbol:
Function of the foot switch
If you press the foot switch for a
longer period, you will switch on /
off the complete control unit.