5
Safety Instructions
Prevent any liquids from entering into the control
unit, since this could damage the electronic el-
ements. Clean the outside of the box only with a
damped cloth. Make sure, that you have
unplugged the unit before.
Only when pulling the mains cable, you can en-
sure that the device will be completely discon-
nected from mains. Check the mains cable
regularly for damages and in case of such, have
it changed or repaired by an authorized service
center.
Prevent your hair from wrapping itself around
moving parts. If applicable, wear a hair net.
When working with materials, which might cre-
ate dust or moisture, use a drilling unit with suc-
tion or spray technique. Wear a nose and mouth
protection. Always follow the safety instructions,
provided by the manufacturer of the materials
being formed and used.
For safety reasons, you must always wear dis-
posable gloves and protective glasses when
operating this unit. In addition, a face mask con-
forming to EN 14683 type IIR or EN 149 FFP 2
must also be worn.
When changing the filter, it is advisable to wear
a face mask conforming to EN 14683 type IIR
or EN 149 FFP 2.
