1
3
What to do if...
Warning! Before trouble shoo
�
ng, disconnect
the power supply. Only a quali
fi
ed electrician of
competent person must carry out the trouble
shoo
�
ng that is not in the manual.
Important! There are some sounds during normal
use (com pressor, refrigerant circula
�o
n)
Important!
Repairs to refrigerators/freezers may only be
performed by competent service engineers.
Improper repairs can give rise to signi
fica
nt hazards
for the user. If your appliance needs repairing,
please contact your specialist dealer or your local
Service Force Center.
Problem
Possible cause
Solu
�on
Appliance does not work.
Appliance is not switched on.
Switch on the appliance.
Mains plug is not plugged in or is loose. Insert mains plug.
Fuse has blown or is defec
�
ve.
Check fuse, replace if necessary.
Socket is defe
c�
ve.
Mains malfun
c�
ons are to be corrected
by an electrician.
Appliance cools too much. Temperature is set too cold.
Turn the temperature regulator to a
warmer se
�
ng temporarily.
The food is too warm.
Temperature is not properly adjusted. Please look in the "in
i�
al Start Up”
se
c�
on.
Door was open for an extended period. Open the door only as long as necessary.
A large quan
�
ty of warm food was
placed in the appliance within the last
24 hours.
Turn the temperature regula
�o
n to a
colder se
�
ng temporarily.
The appliance is near a heat source.
Please look in the “installa
�o
n loca
�
on"
se
c�
on.
Interior ligh
�
ng does not
work.
Light bulb is defec
�
ve.
Please look in the "changing the Light
Bulb “se
c�
on.
Heavy build-up of frost,
possibly also on the door
seal.
Door seal is not air-
�g
ht (possibly
a�er
reversing the door).
Carefully warm the leaking se
c�
ons of
the door seal with a hair dryer (on a cool
se
�
ng). At the same
�
me shape the
warmed door seal by hand such that it
sits correctly.
Unusual noises.
Appliance is not level.
Readjust the feet.
The appliance is touching the wall or
other objects.
Move the appliance slightly.
A component, e.g. a pipe, on the rear of
the appliance is touching another part
of the appliance or the wall.
If necessary, carefully bend the
component out of the way.
The compressor does not
start immediately a
�
er
changing the temperature
se
�
ng.
This is normal, no error has occurred. The compressor starts a
�
er a period of
�m
e.
Water on the
flo
or or
storage shelves.
Water drain hole is blocked.
See the “cleaning and care" se
c�
on.
