Haden 206565, Инструкция по эксплуатации

Страница: 7 / 68

Initial use
Before you prepare water for consumption for the first time, you
must first clean the kettle (8) and the limescale filter (9) in order to
remove dust and any remnants of the packaging material. Proceed
as follows to clean the kettle:
1. Open the lid (1) by pulling the lid handle upwards (2) and remove
the anti-lime filter (9).
Rinse the inside of the kettle (8) with clear water and clean the
limescale filter (9) under running water.
2.
Fill the kettle (8) with drinking water up to the ‘1.7 l MAX’ mark.
3. Close the lid (1). Boil the water once and pour it out.
Repeat steps 1–3. Reinstall the limescale filter (9). The kettle (8) is
now clean. You can now use the kettle.
Maintenance / cleaning
DANGER of burns
Wait until the kettle (8) has cooled down completely
before cleaning it. Otherwise you could burn yourself.
DANGER of electric shock
Always remove the plug from the power socket before
cleaning commences. Otherwise, there is a risk of
electric shock.
Do not pour or spray any liquids onto the base (7) or
immerse it into water or any other liquids. Otherwise,
there is a risk of electric shock and a fire hazard due to
short circuits.
WARNING - potential damage to property
Do not use any scratching or abrasive cleaning agents or
abrasive objects (such as a metal scourer) for cleaning
purposes. Otherwise the kettle (8) may be damaged.
• Rinse the inside of the kettle (8) with clear water.
•
Clean the outer surfaces of the kettle (8) or base (7) with a
slightly damp cloth. Use some
washing up-liquid on the damp cloth for stubborn stains. Make
sure to remove any detergent residue from the kettle (8) and
base (7) before using the kettle (8) again. Dry the kettle (8) and
base (7) thoroughly before the next use.
Environmental and waste disposal information
Devices marked with this symbol are subject to the
European Union Directive 2012/19/EU. Electrical and
electronic devices may not be put in the household waste,
but must be disposed of via designated public disposal
centres. By properly disposing of the old device, you can
avoid environmental damage and hazards to health.
Further information regarding proper disposal of the old
device can be obtained from your local authority or the
shop where you purchased the device.
Marks of conformity
This product fulfills the requirements specified in the
applicable European and national policies. This product’s
conformity has been verified. The declarations and
documents are stored with the manufacturer.
www.haden.com www.haden.com
12 13