14
5.52.159.00.01.04
10.3.2
Installation chain end stop
DANGER!
Take a new chain end stop if a chain is installed.
Insert the bolt (1) of the chain end stop through
the last chain link of the loose chain end.
Knock the ring (2) onto the bolt (1) flushly.
Alternatively the ring can also be pressed on (i.e.
with a vice).
Illustration 16
NOTICE!
When ordering a new chain, also order a new chain end stop!
11
Inspection
11.1
Periodic checks
Independently from the regulations of the individual countries, HADEF lifting devices must be checked at
least yearly by an expert or technician or experts trained by HADEF regarding its functional safety.
11.1.1
Components to be checked
The following must be checked:
Dimensions of load chain, load hooks, pawls, bolts, ratchet wheels, brake linings.
The dimensions must be compared to the dimensions in the tables.
A visual inspection for deformations, cracks and corrosion must be carried out.
CAUTION!
When the wear limit is reached, the part must be exchanged by a new, original part.
at
commissioning
daily
checks
1st maintenance
after
3 months
Inspection
Maintenance
every
3 months
Inspection Mainte-
nance
every
12 months
Check screw connections
X
X
Check lifting, lowering functions.
X
X
Check brake function
X
X
for ratchet lever hoists: Check free-wheeling mechanism of the
chain
X
X
Brake - check wear of brake lining
X
Check chain wheels, ratchet wheels and pawls.
X
Clean and lubricate the load chain.
X
X
X
Check the load chain for elongation and wear
X
Check the load hook for cracks and deformation
X
Load hook - check the safety catch
X
X
Check and lubricate the bearing of the chain pulleys.
X
X
Check the chain pulleys
X
X
Have the equipment checked by a qualified person
(periodic inspection)
X
WARNING!
If one or several of the dimensions fall below or exceed the dimensions in the table, or if cracks or
corrosion are found, the parts must be replaced with original spare parts.
