background image

 

 

 

5.52.301.00.01.03  

 

7

 

3.1 Transport 

 The devices are checked and if so adequately packed before delivery. 

ƒ

  Do not throw or drop the equipment.  

ƒ

  Use adequate means of transport. 

Transport and means of transport must be suitable for the local conditions. 

3.2 

Safety device for transport 

 

NOTICE!

 

Should a safety device for transport exist, please remove it before commissioning. 

3.3 Storage 

ƒ

  Store the equipment at a clean and dry place. 

ƒ

  Protect the equipment against dirt, humidity and damage by an appropriate cover. 

ƒ

  Protect hooks, wire ropes, chains and brakes against corrosion. 

 

4 Description 

 

 

 

 

4.1 

Areas of application 

The devices must be as far as possible installed in a covered room. 
If they are used in the open, protect the units against the effects of weather such as rain, hail, snow, direct 
sunshine, dust, etc. - we recommend to use a cover in parking position. If the device is set up in a 
continuously humid environment with strong temperature fluctuations, the correct functionings are 
endangered by the forming of condensation. 
Ambient temperature -20°C up to +50°C. Power-operated units -20 up to +40°C. Humidity 100 % or less but 
not under water 

 

 

   

DANGER!

 

It is not permitted to use the unit in an area at risk from explosion!

 

 

4.2 Design 

HADEF ratchet lever hoists are compact hoists 
with suspension hook for stationary use. 

 

Illustration 2 

 

 

4.3 Functions 

The load is lifted, lowered or tensioned by operating the lever. The load pressure brake prevents automatic 
lowering of the load. 

NOTICE!

 

If used "overhead" or "lashing" undefined forces may appear. We recommend to use a hoist with 
slipping clutch for these cases. 

 

 

NOTICE!

 

The best protection against functional failures in case of extreme environmental impact is the regular use of 
the equipment. 

 

Содержание 25/13
















Отзывы: