HADEF 25/13 Скачать руководство пользователя страница 5

 

 

 

5.52.301.00.01.03  

 

5

 

   

DANGER!

 

In order to avoid severe injury, please pay attention to the following when using the equipment: 

ƒ

  Use protective clothes/equipment. 

ƒ

  Do not wear long hair hanging down open. 

ƒ

  Do not wear rings or other jewelry. 

ƒ

  Do not wear clothes that are too big/wide. 

ƒ

  Do not reach into ropes, chains, drive parts or other moving parts with your hands 

 

2.4 Appropriate 

use 

The permitted safe working load of the devices must not be exceeded! An exception can be made during the 
load test before initial operation, carried out by a licensed qualified person. 

 

 

ƒ

  The permissible ambient temperature during operation of manual driven devices is -20 ° C / + 50 ° C and 

at all power driven devices -20 ° C / + 40 ° C! 

ƒ

  Defective devices and load suspension devices must not be used until they have been repaired! Only 

original spare parts must be used. Non-compliance will result in any warranty claims becoming void. 

ƒ

  Liability and warranty will become void if unauthorized modifications of the units are made by the user! 

 

ƒ

  Vertical lifting, lowering, pulling and tightening of loads. 

ƒ

  It must be assured that the unit can position itself in true alignment to the load. 

   

DANGER!

 

Ratchet hoists with ship hook can be used  for tightening! 
Only ship hooks can be loaded on its point! 

 

The ratchet hoist is "a unit ready for operation"acc. to the valid national regulations and obtails the 
declaration of conformity CE. 

 

 

 

NOTICE!

 

If the units are not used appropriately, it is not possible to ensure safe operation. 
The owner and operator have sole liability for all personal injury and damage to property arising from 
inappropriate use. 

 

   

DANGER!

 

It is not allowed: 

ƒ

  Pulling loose of stuck loads, dragging of loads and inclined pulling is not allowed. 

ƒ

  The use in area at risk from explosion. 

ƒ

  In reactor containment vessels. 

ƒ

  To transport people with the equipment. 

ƒ

  The device is not suitable for use on stages and in studios! 

ƒ

  Persons must not stand under a suspended load. 

ƒ

  Motor drive of the equipment. 

ƒ

  Blocking of the loose chain end. 

ƒ

   Charging the loose chain end. 

ƒ

  Dragging of loads with motor-driven hoists. 

 

2.5 

Basic safety measures 

ƒ

  Observe installation-, operation and maintenance instruction. 

ƒ

  Take notice of caution notes at units and in the manual 

ƒ

 Observe 

safety 

distances. 

ƒ

  Take care for a free view on the load. 

ƒ

  Only use the hoists appropriately. 

ƒ

  The equipment is to be used exclusively for movement of goods. Under no circumstances my persons be 

moved. 

Содержание 25/13
















Отзывы: