11-02
11-04
11-04
11-03
11-04
11-03
11-03
11-03
11-02
11-02
02
03
04
The photo shows the the assembled support bracket
for the bow of the model. Place the second support
11-03
and the support base
11-04
on your work surface.
Fit the pegs on the lower edge of
11-03
into the
holes of the second support base
11-04
.
Fit the hull into the support
11-03
. Gradually
slide the support to the rear of the hull, as
indicated. The side of the support labelled
“front” should be facing the bow.
The photo shows the support stand pushed
as far back along the hull as possible
Completed work
The length of the port side of the hull has
increased. The hull is safely supported on the
first two stands.
Slide the bow support stand
11-02
/
11-04
back
from the bow. Again, the side of the support
labelled “front” should be towards the bow.
05
06
13
12
AGORA
MODELS
13
AGORA
MODELS
