Specifications
Specifications are subject to change without notice.
Specification
Details
Dimensions (W x D x H)
37 x 30 x 170 mm (1.45 x 1.18 x 6.69 in.)
Enclosure rating
IP67
Weight
135 g (0.297 lb) with batteries
Power requirements (internal)
AAA alkaline batteries (4x)
Battery life
450 hours
Operating temperature
0 to 50 °C (32 to 122 °F)
Storage temperature
–20 to 60 °C (–4 to 140 °F) )
Operating humidity
80% (non-condensing)
Altitude
2000 m (6562 ft)
Instrument range
Cond
LR
: 0 to 1999 µS/cm; Cond
HR
: 0 to 19.99 mS/cm
Resolution
Cond
LR
: 1 µS/cm; Cond
HR
: 0.01 mS/cm
Accuracy
Cond
LR
: ±1% FS
1
; Cond
HR
: ±2% FS
Note: Temperature calibration is not available.
Calibration points
Cond
LR
: 2 points (auto), 1 point (custom); Cond
HR
: 1 point (auto and custom)
Auto-recognition calibration standards
Cond
LR
: 147 µS/cm and 1413 µS/cm; Cond
HR
: 12.88 mS/cm
Certifications
CE mark, FCC, Industry Canada, KC Mark, RCM, China RoHS
Warranty
1 year for manufacturing faults only. Damage from use is not covered.
General information
In no event will the manufacturer be liable for direct, indirect, special, incidental or
consequential damages resulting from any defect or omission in this manual. The
manufacturer reserves the right to make changes in this manual and the products it
describes at any time, without notice or obligation. Revised editions are found on the
manufacturer’s website.
Safety information
N O T I C E
The manufacturer is not responsible for any damages due to misapplication or misuse of this
product including, without limitation, direct, incidental and consequential damages, and disclaims
such damages to the full extent permitted under applicable law. The user is solely responsible to
identify critical application risks and install appropriate mechanisms to protect processes during a
possible equipment malfunction.
Please read this entire manual before unpacking, setting up or operating this equipment.
Pay attention to all danger and caution statements. Failure to do so could result in serious
injury to the operator or damage to the equipment.
Make sure that the protection provided by this equipment is not impaired. Do not use or
install this equipment in any manner other than that specified in this manual.
1
Based on a 2-point calibration and the conductivity range of the calibration standards includes the conductivity
value of the water sample.
2
