manualshive.com logo in svg

Hach LXV320.99.00001, Руководство пользователя

Поделиться
Скачать
Hach LXV320.99.00001 Скачать руководство пользователя страница 12

12

Installation

3.2.3

Charging the rechargeable batteries

Note: 

The instrument must be switched off while charging so that the rechargeable batteries can be 

charged.

Note: 

When using the instrument for the first time, charge for at least three hours. The rechargeable 

batteries are fully charged when the LED on the charger is green.

1.

Connect the charger to the power supply source and then connect to the instrument 
(

Figure 4

). The rechargeable batteries are charged.

2.

Once the rechargeable batteries are fully charged, disconnect the instrument from 
the charger.

Figure 3

 Replacing the adapter

1

Charger

1

3

Removing the adapter

2

Slide switch 

1 

The battery charger must agree with local and national safety regulations and may not be part of the shipment. If the charger 

is not part of the shipment, charge the batteries with a charger available in your country. Make sure that the charger agrees 
the battery specifications.

Содержание LXV320.99.00001





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды