Hach Lange 2100AN, Инструкция по эксплуатации инструмента

Страница: 88 / 108

88
SECTION 10,
continued
9. The left digit flashes. Use the edit (Arrow) keys to change the displayed
number to
0.3180
. Press
ENTER
to accept
0.3180
as the point 2 value (NTU)
10. The large display shows
0.0000 MGL
with the decimal point flashing. Press
the Right Arrow key once to move the flashing decimal point one position to
the right. Press
ENTER
to accept the decimal point location. The left digit
begins flashing. Use the Arrow keys to change the displayed number to
10.000
. Press
ENTER
to accept
10.000
as the point 2 MGL value.
11. The mode display flashes
03
to indicate that point
3
is shown in the large LED
display. The blank spaces in front of the NTU units (
----- NTU
) indicate no
value is assigned to point 3.
12. Press the Right Arrow key to initiate editing of point 3. The large LED display
shows
0.0000
with the decimal flashing. Press
ENTER
to accept the decimal
point location. The left digit flashes. Use the edit keys to change the displayed
number to
0.5420
. Press
ENTER
to accept
0.5420
as the point 3 value (NTU).
13. The large display shows
0.0000 MGL
with the decimal point flashing. Press
the Right Arrow key once to move the flashing decimal point one position to
the right. Press
ENTER
to accept the decimal point location. The left digit
begins flashing. Use the edit keys to change the displayed number to
20.000
.
Press
ENTER
to accept
20.000
as the point 3 MGL value.
14. The mode display flashes
04
to indicate that point
4
is shown in the large LED
display. The blank spaces in front of the NTU units (
----- NTU
) indicate no
value is assigned to point 4.
15. Press the right arrow key to initiate editing of point 4. The large LED display
shows
0.0000
with the decimal flashing. Press
ENTER
to accept the decimal
point location. The left digit flashes. Use the edit (Arrow) keys to change the
displayed number to
0.6630
. Press
ENTER
to accept
0.6630
as the point 4 value
(NTU).
16. The large display shows
0.0000 MGL
with the decimal point flashing. Press
the right arrow key once to move the flashing decimal point one position to
the right. Press
ENTER
to accept the decimal point location. The left digit
begins flashing. Use the edit (Arrow) keys to change the displayed number to
30.000
. Press
ENTER
to accept
30.000
as the point 4 MGL value.
17. The mode display flashes
05
to indicate that point
5
is shown in the large LED
display. The blank spaces in front of the NTU units (
----- NTU
) indicate no
value is assigned to point 5.
18. Press the right arrow key to initiate editing of point 5. The large LED display
shows
0.0000
with the decimal flashing. Press
ENTER
to accept the decimal
point location. The left digit flashes. Use the edit keys to change the displayed
number to
0.7090
. Press
ENTER
to accept
0.7090
as the point 5 value (NTU).
19. The large display shows
0.0000 MGL
with the decimal point flashing. Press
the right arrow key once to move the flashing decimal point one position to
the right. Press
ENTER
to accept the decimal point location. The left digit
begins flashing. Use the edit keys to change the displayed number to
40.000
.
Press
ENTER
to accept
40.000
as the point 5 MGL value.