Hach 9523sc, Руководство пользователя

Страница: 21 / 252

3. Push until "A.hi" shows on the right display.
4. Push or to select the temperature setpoint for the alarm.
5. Push and hold for two seconds to go back to the default display.
Section 7 Advanced operation
7.1 Configure the control mode
For a description of the Operation menu options, refer to Table 3 .
To navigate the Operations menu, follow these steps:
1. Push to select a menu.
2. Push or to find an option.
3. Push to select the option.
4. Push and hold for two seconds to go back to the default display.
Table 3 Operations menu options
Menu option Name Description
C.M1
Control mode Shows the current control
mode: Off, Auto or Manual.
h.Pr1
Heat power Shows the current heat output
level.
Aut1
Autotune Shows the current status of
Autotune: No or Yes.
idS1
Idle set point Configures a setpoint that can
be triggered by an event state.
7.2 Configure the setup mode
For a description of the Setup menu options, refer to Table 4 .
To navigate the Setup menu, follow these steps:
1. Push and hold or to show the Setup menu ("SEt").
2. Push to select a menu.
3. Push and hold for two seconds to go back to the default display.
English 21