30
1.2. Number of programs
Manual Modes, 18 Preset programs, 3 User setting programs, FAT.
1.3. Safe lock function
Remove the safety lock in any modes could rapidly slow down the treadmill till stop.
“---” will
be instantly displayed on the window, the buzzer buzz
“Bi, Bi” sound continuously. Buttons
are invalid in this condition. When the safety lock is off, at the same time press "PROG" +
"MODE" key for 3s, the display switches between imperial and metric systems.
Restore the safety lock, the window will display for 2s and then get into standby state, wait for
inputting commands.
1.4. Key function
START/STOP, PROG,MODE, SPEED/+/-, I/-,
SPEED SHORTCUT KEY: 2.5.8.10.14.16.18.
INCLINE SHORTCUT KEYS: 2%, 4%, 6%, 8%, 10%, 12%, 15%.
⑧
“START” is the start key. Press “START” when the treadmill is in stop state, treadmill will
be started and run at the lowest speed. Press “STOP” when the treadmill is running,
the treadmill will be stopped.
⑨
“PROG” stands for program key: in standby mode , press the key you can select
manual mode "1.0" to "P1-P18" and "U1-U3" different programs ; manual mode is the
default mode, the default speed is 1.0SPEED, the max operating speed is
20
km/h.
⑩
"MODE" stands for mode key, in standby mode, press the key you can loop set H-1 to
H-3 different countdown modes. H-1 is time countdown mode, H-2 is distance
countdown mode, H-3 is calorie countdown mode; all mode parameter can be setted
by SPEED +/- key, and press "start" key to start the treadmill.
⑪
Speed keys: “SPEED+” and “SPEED -” are accelerating and decelerating keys:
They may be used to adjust parameter setting when setting up parameters of the
treadmill. When the treadmill is running, they are used to adjust the speed for
0.1km/time; after holding for more than 2s, automatic continuous acceleration and
deceleration will be realized.
⑫
Incline key: “” and “INCLINE-” are incline increasing and incline reducing
keys: They may be used to adjust parameter setting when setting up parameters of
the treadmill. When the treadmill is running, they are used to adjust the incline for 1
grade/time; after holding for more than 2s, automatic continuous increasing or reducing
will be realized.
⑬
Speed shortcut keys:
Speed can be directly adjusted to 2km/h, 5km/h, 8km/h, 10km/h,
14km/h, 16km/h or 18km/h
by speed shortcut keys when the treadmill is running.
⑭
Incline shortcut keys: Incline can be directly adjusted to grade
3,, 6, 9, 12 or 15
by
incline shortcut keys when the treadmill is running.
1.5. Display function
1.5.1. Speed display
Display the current running speed.
1.5.2. Lift display
Display the current running lifting value.
