Habegger HIT Series Скачать руководство пользователя страница 8

Страница: 8 / 26

Betriebs- & Wartungsanleitung

TS. 02.06.2020

Technik

Seite 8 von 26

©Copyright by Habegger Maschinenfabrik AG

Version 04 / 02.06.2020

General safety rules

Only use the hoist device if it is in proper working order and in compliance with the operating instructions.

The HABEGGER HIT hoist devices comply with the current state-of-the-art.

Laws, regulations and safety equipment do not offer protection against carelessness and negligence!

Before you work with the hoist device, you must carefully read and comply with the following safety in-

structions.

It’s about your safety!

2.1

Safety information in this operation manual

For hazards, notes and important information, the following symbols and descriptions are used:

Notices are particularly important information which you must comply with when operating the equip-
ment for its intended use.

Caution! Note indicates hazard for the machine, machine parts and the environment.

Danger! Note referring to hazards to health and the life of the operator and other persons in the work-
ing area of the motor-driven rope pulling machine.

2.2

Intended use

The hoist device is for pulling, lifting, lowering and securing loads and tightening tether and guiding lines.

The hoist devices may only be used to transport persons in compliance with the special requirements.

2.3

Authorized operators

The hoist device must only be used by a specialist person who is authorized. As the operating company for the hoist device,

make sure that the operation manual is made accessible to the operator and ensure that they have read and understood it.

2.4

Warranty and liability

Habegger warrants the replacement as well as installation and removal of parts which have become demonstrably unusable

as a result of material or manufacturing defects.

The warranty period (guarantee term) is 12 months.

Warranty and liability claims for injury to persons or damage property are excluded is they are due to one or more of the

following:

use of the rope pulling machine other than intended use

improper operation and maintenance of the rope pulling machine

Failure to comply with the information in the operation manual regarding operation and maintenance of
the rope pulling machine

independent modifications on the rope pulling machine

poor monitoring of machine parts which are subject to wear

repairs carried out improperly

Catastrophic failures due to foreign objects and force majeure

Содержание HIT Series



























Результаты поиска

Содержание HIT Series

Отзывы:

Бренды по названию

Популярные бренды

Habegger HIT Series, Руководство по эксплуатации

Результаты поиска

Содержание HIT Series

Отзывы:

Бренды по названию

Популярные бренды