Habasit Rossi IFIT Series, Руководство по эксплуатации

Страница: 6 / 36

General safety information 1
Safety during installation
An incorrect installation, an improper use, the removing or disconnection of protection devices, the lack of inspections and
maintenance, improper connections may cause severe personal injury or property damage. Therefore the component must be
moved, installed, commissioned, handled, controlled, serviced and repaired exclusively by responsible qualifi ed personnel .
Qualifi ed personnel must be specifi cally trained and have the necessary experience to recognize any risks (see section 1.2.1
- Residual risks) related to these products, avoiding possible emergency situations.
Gear reducers and gearmotors in this manual are normally intended for installations in industrial areas : additional protection
measures that may be necessary must be adopted and ensured by the personnel responsible for the installation.
Attention!
Motors in non-standard design or with constructive variations may diff er in the details from the ones described here
following and may require additional information.
Attention!
For the installation use and maintenance of the electric motor (standard, brake, or non-standard motor) or the
possible motor-variator and/or the electric supply device (frequency converter, soft-start, etc.), and/or any optional
electric devices (e.g.: independent cooling unit, etc.), consult the specifi c attached documentation. Request it if
necessary.
Maintenance safety
When operating on a gear reducer or components connected to it, the machine must be at rest, disconnected from the power
supply, and cold
: disconnect the motor (including auxiliary equipment) from the power supply, gear reducer from the load, be
sure that safety systems are on against any accidental starting and, if necessary, pre-arrange mechanical locking devices (to be
removed before commissioning).
Attention!
During the running the gear reducers could have hot surfaces ; Always wait that the gear reducer or the gearmotor
to cool before carrying out any operations.
Further technical documentation (e.g. catalogs) can be downloaded from our website www.rossi.com or can be
directly required to Rossi S.p.A. For any clarifi cation and/or information, please contact Rossi S.p.A. specifying all
data found on the name plate.
6 UT.D 208-2021.12-EN