Operating instructions 36008
Hot-pressing device
PT-50
Page 3 of
16
Edition: 01/0409
Subject to alterations
1. General
information
1.1 Application
Hot-pressing device PT-5 was specifically designed for the rapid and safe hot-pressing of Thermofix joints
for Habasit belts and tapes up to a width of 50 mm /
2 in.
The maximum belt thickness is 2.0 mm /
0.08 in
..
The PT-50 hot-pressing device was developed solely for the purposes described in the operating
instructions. Improper use, or use for other reasons than those described in the instructions, is not
permissible. Habasit accepts no liability for the consequences of improper application.
The hot-pressing device PT-50 is manufactured according to recognized engineering principles and state-of-
the-art technology, and complies with applicable regulations.
It is understood in these operating instructions that all assembly, maintenance, and repair work, as well as
operation of the press, is carried out by skilled personnel or monitored by responsible specialists.
For reasons of scope, these instructions cannot cover all possible aspects of operation, maintenance, or
repair. The indications given herein refer to the use of the machines according to their designated purpose
by skilled personnel.
In case of doubt or if further detailed information is required, please consult the manufacturer (Chapter 1.4).
1.2
Important safety terms
In these operating instructions, you will find the terms WARNING, CAUTION, and INDICATION. They signal
dangers or special information to be borne in mind.
WARNING
If disregarded, there is a danger of severe injury and/or severe material damage.
CAUTION
If disregarded, there is a danger of injury, and/or material damage may be caused.
INDICATION
Technical information is emphasized if it is important and not readily apparent, even for
skilled personnel.
Please observe all indications for assembling, operating, and maintaining the machines, as well as all
technical data! This will prevent possible trouble and/or damage to people or materials.
Skilled personnel
refer to persons authorized to perform the required work. These people have been
sufficiently trained and introduced to their field of activity so that they are able to recognize and prevent
dangers. They are aware of the pertinent provisions and safety regulations.
