Operating instructions 36008
Hot-pressing device
PT-50
Page 13 of
16
Edition: 01/0409
Subject to alterations
9. Accessories
9.1 Preparing
devices
9.1.1 Manual skiving tool AT-60
The AT-60 is a preparing device for skiving of Habasit belts and tapes up to a width of 60 mm /
2.4 in.
and a
thickness of 2 mm /
0.08 in.
The belt / tape is clamped and stuck on a steel plate. It is ground manually by
means of a skiving disc. Adjustment is done with two different settings.
The AT-60 is especially suitable for occasional preparation of single belts or spindle tapes on site in
maintenance.
→
Ill. (7)
9.1.2 Skiving tool AT-200
The AT-200 is a preparing device for skiving of Habasit belts and tapes up to a width of 200 mm and a
thickness of 7 mm. The belt is clamped and stuck on a steel table. The tilt of this table is adjustable in six
steps; it is fed under a grinding drum on precise guides. For the drive of the unit, there are two options: The
device is equipped with a high-torque power drill, or with a stub axle to be driven / motorized according to the
desires of the customer. Feed of the table is by means of a hand wheel.
The AT-200 is suitable for preparation of belts and tapes in small to medium series.
→
Ill. (8)
Illustration 7
Illustration 8
