Habasit PM-306 Скачать руководство пользователя | Manualshive

Страница: 9 / 79

background image

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545

Hot Press PM-306

Author: S.D.T.

/KM

REGULATIONS AND GENERAL WARNING NOTES

Edition: 02/2005

Page

A-4

Replaces: 01/2002

A.3

Use criteria

HABASIT requests the Customer to fully read this manual on delivery of the hot-pressing device it
accompanies, and always before attempting any action on the hot-pressing device. This manual is
arranged to supply all the instructions, indications and warnings the user may need in order to know the
hot-pressing device, understand its operating principles, and to be adequately informed to ensure safe
use.

In addition to the instructions in this manual, we would ask users to observe any specific current laws.
This manual must be considered as an essential part of the machine. Its content must be made known to
the entrusted maintenance persons and users.
The purpose is to provide all the information required for good, correct use of the device.

The manual must be kept throughout the life of the hot-pressing device and must be updated in the event
of modifications aimed at improving the device’s performance.
The manual must be available to qualified personnel.

Consultation of this manual is facilitated by the general index on the first page, which makes it possible to
immediately find the subject of interest.
If the subject dealt with is particularly important it is highlighted with references to the type of technical
personnel required to intervene.

All updates HABASIT considers necessary to improve the quality of the hot-pressing device will be
communicated by way of sending further specific documentation or a new manual to replace the previous
one.
If the hot-pressing device is sold to another customer, the manual must accompany the hot-pressing
device and the new customer must be notified to HABASIT for any future modifications and updates.

A copy of this manual, delivered with the hot-pressing device, is meant for the maintenance operators,
who shall read and keep it near the hot-pressing device, and consult it before undertaking any action on
the hot-pressing device.

Hot-pressing device PM-306

«
...
7
8
9
10
11
...
»

Содержание PM-306
















































































Отзывы:

Нет отзывов

Похожие инструкции для PM-306

Бренд: Wacker Neuson Страницы: 42

Бренд: King Industrial Страницы: 7

Бренд: Kaindl Страницы: 19

Бренд: Westward Страницы: 9

Бренд: Cornwell Tools Страницы: 4

Бренд: Malibu Boats Страницы: 2

Бренд: Unimac Страницы: 15

Бренд: Sharkoon Страницы: 10

Бренд: LIVARNO LUX Страницы: 100

PowerPack PC100

Бренд: Waeco Страницы: 115

Бренд: Porter-Cable Страницы: 40

Бренд: REED Страницы: 2

Бренд: Wacker Neuson Страницы: 74

Бренд: HQ Страницы: 25

Бренд: Di-Acro Страницы: 3

Бренд: Black Ridge Страницы: 16

Бренд: GOAL ZERO Страницы: 40

S8VS - MODEL 15-30-60-90-120-180-240W

Бренд: Omron Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды