1
The images show parts of the machine isolated.
Do not remove parts unless the instructions tell
you to.
Remove the upper spindle head covers.
Install these parts on the PCOOL ASSEMBLY [B] as
shown in the image:
1. SWIVEL FITTING [K]
2. 45 DEGREE FITTING [L]
3. P-COOL MILL DRILL HOSE [H]
4. STRAIGHT FITTING [M]
2
Install the PCOOL ASSEMBLY [B] on the PCOOL
MOUNT UMC-750 [A]. Use the (2) 1/4-20 X 1/2
SOCKET HEAD CAP SCREWS (SHCS) [E].
Install the hole PLUG [Q] onto the PCOOL MOUNT
UMC-750 [A].
Remove the PCOOL mount cover from the
UMC-750. Connect the PCOOL M12 CABLE [C] to
the PCOOL and the junction box near the top of
the spindle. Install the CABLE CLAMP [R]. Use the
clamp and zip-ties to put the cable in the correct
position. Put the remaining cable in a coil.
Install the PCOOL [1] to the spindle head cover
[2]. Use the (4) 1/4-20 X 1/2 BHCS from the
PCOOL mount cover.
Note:
Use the (2) 1/4"-20 X 1/2" BUTTON HEAD
CAP SCREWS (BHCS) [F] in the kit to replace
missing BHCS.
3
Install these parts on the PCOOL TUBE 1 [J] as
shown:
1. 90 DEGREE FITTING [N]
2. STRAIGHT FITTING [O]
3. FLOW BALL VALVE [P]
4. STRAIGHT FITTING [O]
Put the tubes through the sheet metal bracket
[1].
PCOOL - Installation - UMC-750 - AD0322
Page 3 of 4 pages
