6
Ascertain the side of the stove on which the tank is to
be mounted. This depends on the direction from which
the tank is easier to fill (consider room corners,
furniture etc.!)
1. Slide in the tank frame; for filling the oil tank from the
left or right the frame can be mounted either from the
front or from the rear. (see Figure 3).
Figure 3:
Assembling the tank frame
1
Tank frame
Figure 4:
Assembling the tank lock
1
Slide in tank frame,
2
Secure with tank lock and sheet metal screw.
2. Position tank lock and secure with the sheet metal
screws (see Figure 4).
3. Eight rectangular horizontal slits (to the left or right of
the flue pipe spigot) are located in the rear wall of the
stove
– corresponding with the holes of the tank
bracket.
Insert 4 snap-on clips (see
Figures 5 + 6) either in the 4 left
or right slits (L or R).
4. Now hook the tank bracket into
the top and bottom snap-on clips
(see Figure 7).
Figure 7:
Installing the tank bracket
1
Tank bracket,
2
Rear wall.
3
Snap-on clip
Figure 8:
Assembly of the insert angles
5. Screw the two insert angles to the tank bracket.
Installing the oil tank
1. Hook in the oil tank and screw to the tank with the
flexible oil line. (Open-end wrench 17). Carefully tighten
the union nut to avoid damaging the thread,
Figure 5:
Inserting the snap-on clip
Figure 6:
Ibiza 469.50
Installing the snap-on clip in
the rear wall L+R (left or right)
A= Oil guide plate opening
B= Tank screen panel opening
