HAAS + SOHN HSP 4.0-F2, Лист оборудования

Страница: 5 / 23

T
echnical
data
GB
1
1. Technical data
HSP 4.0–F2 456.08
Nominal
output
Partial output
50%
Partial output
30%
Heat output range: 8,5 kW 3,7 kW 2,6 kW
Nominal heat output: 8,5 kW
Test conditions defined by norm:
EN 14785
Height:
1206 mm
Width: 954 mm
Depth:
380 mm
Weight: 232 kg
Diameter of flue elbow: 80 mm
Flue gas temperature:
132 °C 78 °C 65 °C
Testing transport pressure:
12 Pa 6 Pa 6 Pa
Flue gas flow rate in g/s: 5,5 g/s 3,8 g/s 3,2 g/s
CO level in flue gas (%) (min./max.)
0,001 % 0,016 % 0,021 %
Efficiency:
94 %
95,3 %
96 %
CO level in flue gas: 16 mg/Nm³ 199 mg/Nm³ 268 mg/Nm³
NOx level in flue gas: 80 mg/Nm³ 75 mg/Nm³ 55 mg/Nm³
OGC level in flue gas: 3 mg/Nm³ 8 mg/Nm³ 12 mg/Nm³
Proportion of dust in flue gas: 4 mg/Nm³ 10 mg/Nm³ 9 mg/Nm³
Contents of storage container (pellet tank): about 40 kg
Duration of burn with one charge (min./max.):
about 21 h about 44 h about 44 h
Permitted fuel: Low-dust wood pellets
diameter: 6 mm
to Ö-Norm M 7135, DIN plus, EN plus-A1
length: max. 30 mm
Room heating capacity to Ö-Norm M 7521: max. 230 m³
Electricity supply: 230 V (50 Hz)
Electricity supply input:
in normal operation:
18,9 W
Electric ignition (for max. 15 minutes on ignition):
max. 380 W
Fuses for the ignition, screw conveyor motor, induced
draught, (F1)
T 3,15 A, 250 V
Safety distances
Minimal distances from flammable materials:
side left: 2 cm
side right: 8 cm
rear:
5 cm
front (radiation area): 60 cm