HAAS + SOHN Catania, Инструкция по установке и эксплуатации

Страница: 25 / 34

25
combustion chamber” instruction, is automatically
reset to zero.
This reset of the operating hours counter occurs
even if the cleaning of the combustion chamber is
performed before the 50 operating hours have run
provided that the stove is in “Off” operating status
and the door is open for longer than 60 seconds
during cleaning.
20. Error in parameters Factory settings have
been uploaded
– Fault has been cleared
(60)
Cause:

Program fault

Defective part in the operator console.
Correction:

Contact the service engineer
21. Backup battery empty
Cause:

Backup battery of the central unit is
empty

Backup battery not connected
Correction:

Check connection

Replace backup battery

Contact the service engineer
22. Error
– data transmission IO19 ( D3 )
Check cable (6000)
Cause:

No connection between operator console
and central unit

Component fault in the central unit
Correction:

Check connection cable between
operator console and central unit

Contact the service engineer
23. Error
– data transmission IO19 ( D5 )
Check cable (6001)
Cause:

No connection between operator console
and central unit

Component fault in the central unit
Correction:

Check connection cable between
operator console and central unit

Contact the service engineer
24. Error
– data transmission IO19 ( D6 )
Check cable (6002)
Cause:

No connection between operator console
and central unit

Component fault in the central unit
Correction:

Check connection cable between
operator console and central unit

Contact the service engineer
25. Error, Amtel version ( D3 ) (6100)
Cause:

Component fault in the central unit
Correction:

Contact the service engineer
26. Error, Amtel version ( D5 ) (6101)
Cause:

Component fault in the central unit
Correction:

Contact the service engineer
27. Error, Amtel version ( D6 ) (6102)
Cause:

Component fault in the central unit
Correction:

Contact the service engineer