HAAS + SOHN Catania, Инструкция по установке и эксплуатации

Страница: 19 / 34

19
10. Options
A remote control by means of GSM module can
be used as optional accessory.
The future-orientated module (as accessory)
using mobile phone requires only one second
SIM-card. A fixed line connection is not necessary
for this.
With that you have the possibility of

Interrogating the operating states,

Reading off fault messages,

Changing the operating states e.g.
switching ON and OFF,

Adjusting the room temperature and

Interrogating the ACTUAL room
temperature via SMS.
If a fault should occur, the GSM module of the
pellet stove automatically transmits an SMS with
the error message to the
user’s mobile phone.
The remote control via SMS is so secured, that an
unintended faulty switching by a third-party mobile
phone is impossible, since the remote control is
only possible with the user’s mobile phone.
10.1. Parts list
Picture
17: Parts list GSM Module
1. Plug-in power unit
2. GSM Terminal TC35
3. Antenna
4. Data cable module pellet stove
5. Velcro fasteners
10.2. Assembly instructions GSM Module
Picture
18: Connections GSM Module
1 = Data cable connection
2 = Antenna connection
3 = Connection of plug-in power unit
10.2..1 Assembly of the antenna
To ensure perfect radio reception, the position of
the antenna should be checked with a mobile
phone before the antenna assembly (same
network operator as with GSM-transmit module).
The antenna must be screwed onto the
connection provided.
10.2..2 Connection
The transmission of data from the controller to the
GSM-transmit module takes place over the
connection cable (4). Connect the data cable (4)
to the GSM Terminal with the control of the pellet
stove.
10.2..3 Assembly of the module
In order to fit the module (2) e.g. on the pellet
stove, the self-adhesive Velcro fasteners (5) must
be stuck to the back of the module and to the
respective surface
.
Picture
19: Assembly GSM Module