STEP 23
If the alignment is correct, torque the (16) screws [1] that attach the
wedge to the linear guide trucks.
For torque values, refer to
Haas Fastener Torque Specifications
.
STEP 24
If the alignment is correct, torque the (10) screws [1] that attach the
wedge to the linear guide trucks.
For torque values, refer to
Haas Fastener Torque Specifications
.
STEP 25
Replace the plugs (P/N 20-4300) that cover some of the screws.
Caution:
Without the plugs, chips can build up in the holes and
the wiper can sweep them into the linear guides and cause
damage.
Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction | Last Published On November 05, 2015
22/67
