![background image](http://html.mh-extra.com/html/haaga/677/677_operating-instructions-manual_575811051.webp)
English
51
4. Knock out the foam insert.
5. Clean the foam insert with water and
allow to dry.
6. Insert the cleaned foam insert in the
filter element.
7. Insert both filter elements in the
guides.
8. Fit the waste bin.
8.3 Eliminating blockages
Danger of injury!
• Wear sturdy gloves in order to avoid
cut injuries, e.g. due to glass shards,
metal or other sharp-edged materials.
1. Remove wound-up material (e.g.
threads, string…) from brushes and
axles.
2. Remove any jammed material (e.g.
stones, branches, …).
8.4 Spraying the brush drives
with lubricant
CAUTION!
• Damage to the sweeper due to
improper lubrication.
• Use only Haaga genuine lubricant
spray. Use of other oils or greases can
impair functioning of the brush drives.
1. Position the sweeper so that it is verti-
cal.
2. Recommendation: spray a sparing
amount of Haaga lubricant spray onto
the brush drives through the opening in
the housing.
3. Remove excess lubricant.
• Recommendation: Every 8 hours or
operation or as required.
• Haaga genuine lubricant spray is
available as an accessory (article no.
923000).
8.4 Straightening bristles
Danger of fire!
• Do not use naked flames or burners to
heat the bristles!
• Do not use a heat gun. The brushes
may melt due to the excessively hot air.
NOTE
Bent bristles can be straightened again
by heating with a hot-air blower.
Haaga 6-er Reihe 6 Sprachen.indb 51
18.08.2015 17:11:33
Содержание 677
