Haag-Streit LI 900 Скачать руководство пользователя страница 7

Страница: 7 / 20

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

3 Introduction

3.1 Device description

• The illumination set LI 900 consists of an LED illumination unit, a power supply

PS-LED and an illumination control. A light conductor set is also required for the

version with background illumination. Slit lamps with LED lighting may only be

used with the intended PS-LED or RM02 power supply.

• Both the supply current for the LED and the signals for communication between

the power supply and illumination are conducted by the two-pole connection

cable.

• The light intensity of slit and background illumination can be controlled

continuously with the illumination controls. The illumination controls can be

connected to the power supply PL-LED with a longer connection cable.

NOTE!

The instruction manual for the slit lamp must be complied with.

3.2 Overview

1. LED illumination LI02 plus with background illumination

2. LED illumination LI01 without background illumination

3. Plug connection for headrest

4. Filter wheel for blue filter

5. Background illumination connection

6. Lid

3.3 LED illumination LI02 plus
3.3.1 Blue filter

7. The rotating wheel is used to pivot the blue filter for the background

illumination. Marking points at the same height = blue filter is on.

3.3.2 Background illumination

The background illumination can only be used in

conjunction with an LED illumination LI02 plus.

8. Background illumination fixed

9. Background illumination pivoting

3.4 Power supply PS-LED
3.4.1 Versions

10. Power supply PS-LED, for installation on third-party tables and units

11. Power supply PS-LED HSM 901 insert, for the instrument table HSM 901

Содержание LI 900





















Результаты поиска

Содержание LI 900

Отзывы:

Бренды по названию

Популярные бренды

Haag-Streit LI 900, Инструкция по эксплуатации

Результаты поиска

Содержание LI 900

Отзывы:

Бренды по названию

Популярные бренды